Your gate is light; a 500–800 kg motor runs it comfortably without strain or extra cost.
Your gate is medium; an 800–1000 kg motor covers it steadily. Exact pick confirmed with size and usage.
Your gate is medium-heavy; a 1600 kg motor is the ideal balance — enough power without overpaying.
Your gate is heavy; it needs a 2000 kg motor for stable, safe movement. For intensive use, ask for the heavy-duty version.
Your gate is very heavy; it needs a 2000 kg heavy-duty motor or higher based on actual weight. Our sales team confirms the best fit.
No problem if you are unsure of the weight — from the width, height and usage you selected, our sales team calculates the correct power precisely.
Buy a complete automatic sliding gate opener kit for an iron sliding gate in Egypt.
Choose the right motor by gate weight, gate length, and daily cycles.
Homes, villas, and small commercial entrances.
Send your gate details. Get a matched motor class.
Confirm fit, stock, and delivery in Egypt.
Send these 6 details to get the correct kit
- Gate weight in kg.
- Gate length in meters.
- Daily cycles, open and close per day.
- Track condition, smooth or dragging.
- Power type, 230Vac or 24Vdc system.
- Accessories needed, photocells, warning light, key switch, keypad.
Available automatic sliding gate opener kits
Pick a kit from the slider, then message us with your gate details to confirm the best match.
Choose the right kit in 3 steps
1) Match gate weight
Choose a motor class above your measured gate weight.
2) Match daily usage
Higher cycles need a motor designed for frequent operation.
3) Match site condition
Poor rollers and misalignment raise load and reduce reliability.
Comparison table for popular sliding gate motors
Use this table to shortlist by weight, power type, speed, and duty cycle.
Confirm your final motor selection on WhatsApp.
| Model | Max gate weight | Power type | Speed | Motor power | Duty cycle | Protection |
|---|---|---|---|---|---|---|
| KEY Automation SC82 | 800 kg | 230Vac | 16 cm/s | 450 W | 30% | IP44 |
| Gruppo Norton MSC 1000 FCM | 1000 kg | 230Vac | 9.6 m/min | 550 W | Not stated in the datasheet table section | IP44 |
| Gruppo Norton MSC 2000 FCM | 2000 kg | 230Vac | 9.6 m/min | 650 W | Not stated in the datasheet table section | IP44 |
| KEY Automation TURBO 200 SC202MHD | 2000 kg | 230Vac | 17 cm/s | 920 W | 50% / 70% (depends on gate weight) | IP44 |
| KEY Automation TURBO 200 SC252M | 2500 kg | 230Vac | 17 cm/s | 920 W | 50% / 70% (depends on gate weight) | IP44 |
What you get when you order a complete kit
Core system
- Motor and gearbox matched to your gate class.
- Control board to manage open, close, stop.
- Receiver and remote controls, based on the kit.
Accessories you may add
- Photocells for obstacle detection.
- Warning light for movement indication.
- Key switch, keypad, or GSM module for access control.
Confirm fit before you pay
Send your gate details. Customer service confirms the correct motor class and compatible accessories.
FAQ
What details do you need to select the right motor?
Which is better for frequent use, 230Vac or 24Vdc?
How do you choose between 800 kg and 1000 kg motors?
Can you confirm kit contents before I order?
Ready to order
Pick a kit from the slider, then send your gate details. We confirm fit, stock, and delivery in Egypt.