✅ Electric Roller Blind Motor With Remote Control
Send blind weight, tube diameter, and number of blinds. You get a compatibility confirmation before you pay.
Quick decision
If you control one blind, use a 1-channel remote setup.
If you control multiple blinds, use a multi-channel remote setup, up to 15 channels depending on the remote.
Use indoor dry areas only. IP20 matches indoor use.
Who this fits
- You want a tubular motor for indoor roller blinds.
- You want remote control for one blind or multiple blinds.
- You want to confirm compatibility before ordering.
- You want fast delivery in Cairo & Giza.
Choose in 30 seconds
Step 1. Tube diameter
Measure in millimeters. If you do not have a caliper, send a clear photo with a ruler.
Step 2. Blind weight
Write weight in kilograms. If unknown, send blind size and fabric type.
Step 3. Number of blinds
One blind needs 1-channel. Multiple blinds need multi-channel, up to 15 depending on the remote.
Specs shown on this page
Tube size
25 mm
Torque
2.0 Nm
Voltage range
100V to 240V
Protection
IP20
Control
1-channel for one blind, or multi-channel up to 15 channels depending on the remote.
Speed
3 speeds from 20 to 35 RPM.
Dimensions
25 mm diameter, 455 mm length.
What is in the box
- Motor
- Remote
- Mounting accessories and tube adapters
Before installation
- Confirm indoor dry area use. IP20 does not protect from direct water.
- Confirm tube diameter before mounting the motor.
- Mount brackets straight to reduce stress on the motor.
- Test direction and limits before daily use.
Photos


