Electric Gate Push Button — The Wired Indoor Control Explained
Electric Gate Push Button — The Wired Indoor Control Explained
An electric gate push button is the simplest wired control for an automatic gate: a momentary button, usually mounted indoors (reception, kitchen, guard room), that pulses the control board’s command input exactly like a remote press. Unlike a key switch it has no lock — so it belongs where access is already controlled, while the key switch guards the outdoor side.
🔘 Momentary dry-contact button🏠 Indoor & guard-room control🧩 Works with any board input🏷️ European units in stock🚚 Delivery across Egypt
Where a push button beats a key switch — and where it doesn’t
Inside the property, convenience wins: a receptionist or doorman opening the gate dozens of times a day should not juggle a metal key. A push button gives one-tap operation from the desk. On the street side the logic reverses — anyone can press a button, so the outdoor pillar takes a key switch and the indoor station takes the button. Most complete gate setups run both on the same board input family.
The button is a dry contact — two wires from its NO terminals to the board’s command input (START/SBS/PED). No power feed, no polarity. Cable runs of tens of meters on 1.5mm² wire are routine, which is why buttons live comfortably far from the gate. Multiple buttons can share the same input in parallel: press any of them and the gate cycles.
Choosing a unit that lasts
For daily heavy use, pick a button with a rated mechanical life in the hundreds of thousands of presses and a comfortable, wide cap — the difference between commercial-grade European units and giveaway buttons shows within months at a busy entrance. Illuminated versions help in dark guard rooms; weatherproof (IP54+) versions cover semi-outdoor mounting like covered gatehouses.
Does the push button need its own power?No — it is a dry contact. Only illuminated models take a small feed for the lamp; the switching itself is voltage-free.
Can I wire two buttons for the same gate?Yes, in parallel on the same command input. Any of them will trigger the cycle.
Push button and key switch together — possible?That is the standard layout: button indoors for convenience, key switch outdoors for security, both on the board’s command inputs.
How far can the button be from the gate?Tens of meters on ordinary 1.5mm² control wire is no problem for a dry-contact circuit in typical installations.
Will it work with my Chinese control board?If the board has any dry-contact command input, yes. Send a photo of the terminals on WhatsApp +201098470908 and we confirm before shipping.
Can the button hold the gate open?A momentary button cannot — holding functions come from the board’s logic settings, not the button. Tell us the behaviour you want and we advise on the board side.
What is the price of a gate push button?It depends on grade and features (illumination, IP rating). Message us on WhatsApp for the updated price and stock.
Abu Seif Steel supplies wired gate controls — push buttons, key switches and boards — across Egypt with WhatsApp technical support. Supply only; 12+ years in the market.
